The HG8245 with routing function, but the default does not open. There are many routing settings online, but Huawei OLT they
are not comprehensive enough, below
is the summary.
1 wire connection
light cat, first dial.
2 super user login name and password. Methods are as follows:
2.1 if the system is XP, skip this step; if it is win7, "control panel" - "programs
and features"- "to open
or close the windows function", "telnet server" and "telnet
client" confirm open.
2.2 "start" - "run", type "cmd":
Enter
"telnet 192.168.1.1" (see photo cat behind
the post code),
Input "root",
Input "admin",
Input "shell",
Enter
"grep telecomadmin /mnt/jffs2/hw_ctree.xml"
You can get the super user login name and password.
3 login light cat. Enter
"http://192.168.1.1" in
IE, can appear light cat login interface, inputjust won the super user login name and password to log on.
4 find "network", "set", with the
word "INTERNET_B_VID_" to
delete the connection name,then
the new, "enable WAN connection" to open, "connection type" select
"routing","service list" choose
"INTERNET", "enable VLAN to
open," "get IP" selection "PPPOE",then input the telecommunication to your home broadband account name and password,"binding" to opening. At present, only the lack of a VLAN ID.
5 VLAN ID.
"Start"
- "run", type "cmd":
Enter
"telnet 192.168.1.1" (see photo cat behind
the post code),
Input "root",
Input "admin",
Enter
"get port config PortId 1", the value
is the portvid= VLAN ID, PortPri= 802.1p(numerical is the basic original default can, mainly
VLAN ID)
6 Then input VLAN ID value, and save it.
7 now out of dial-up connection, if you can not surf the Internet, check
the 1-6 step and repeat.
